Fujikura 70S Fusion Splicer is core-to-core alignment single fiber splicer, which is designed for splicing single-count optical fibers: SM (G.652/657), MM (G.651), DSF (G.653), NZDSF (G.655) for telecommunication use, PON/FTTx networks, etc. Splicing takes only 7 seconds, and heating takes only 14 seconds.

The device is optimized for splicing under severe weather conditions, it is protected from stress and shock. It may be powered from 110/220 V AC, or using a battery (included). For user comfort the package contains a convenient working table, where you may place the needed tools: a cleaver, a stripper, sleeves, etc.

Features:
● Splices all known types of fibers.
● Fiber core alignment.
● Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB.
● Reduced splicing time – 7 seconds only.
● Heating time – 14 seconds only.
● Increased electrode lifetime – up to 3000 splicing cycles with one set, without splicing quality loss.
● Battery life increased up to 200 full splicing/heating cycles.
● Rotary color anti-glare LCD 4.73", high contrast and vividness.
● Simultaneous display of X and Y axes.
● May splice SC, LC, MPO connectors.
● Automatic: wind-protective lid, heater, fiber holders.
● Increased water, dust and shock resistance, may be used under severe environment conditions.
● Automatic arc calibration.
● Battery BTR-09 is included.
● New comfortable carrying case, optimized for quick operation start.
● The case may be used as a working table.
● Operation manual is installed into the splicer.
● Software update option.
● 2 years of full warranty with the device replacement.